Make Small Powder Coating Equipment

Airbrush guns blow a fine, controlled mist of paint. One piece of home powder coating equipment that a powder coating hobbyist may want to make is a paint gun. The device is similar to an airbrush gun, but the particles of powdered paint are charged with an ionizer as they leave the gun so they cling to objects.
Instructions
 

1 Take the cover off the case of the ionizer and find the metal part(s) that ionize the air. If the ionizer has a fan, they will surround the fan's airflow path.
2 Attach the ionizer to the handle of the airbrush gun using electrical tape. Ensure that you can turn the ionizer on and off easily.
3 Strip the insulation from each end of the wires. Attach one end of each wire to the ionizer. Tape the wires down along the airbrush gun, then cut them long enough to reach the front of the gun.
4 Bend the wires around the nozzle of the airbrush gun so the paint that comes out passes through the ionizing field created by the wires.
5 Load the airbrush gun's paint reservoir with powdered paint that suits the powder coating application you need.
Tips & Warnings
Wear a breathing mask when operating the powder paint gun